Self leveling pedestals for paving

Self leveling pedestal 115/175 mm for paving

The self-leveling paving pedestal is a height-adjustable support allowing the installation of terraces raised. The 115/175 mm self-leveling pedestal is made up of 2 elements: an adjustable pedestal from 90 to 150 mm as well as a self-leveling disc. The disc is fixed to the stud thanks to a system of clips and adds 25 mm to the final height of the slab terrace pedestal. Designed for installation on terrain with level differences, the self-leveling disc compensates for up to 5% slope on 1 meter. Thus, save time on the realization of your installation.
EAN: 3052350898469

Resistance:

The self-leveling paving pedestal withstands loads of up to 1 ton. Robust, it supports without deterioration temperature variations from -40°C to + 60°C, UV rays, frost as well as acidic and chemical products. The self-leveling pedestal for terrace is compatible with a installation near a swimming pool.

Manufacturing:

Made in France, the RINNO self-leveling paving pedestal is respectful of the environment. It is made from polypropylene, a recycled and recyclable material.

Conformity:

RINNO pedestals comply with current standards: DTU 43.1 and 51.4

Using the self-leveling paving pedestal for terrace:

The self-leveling slab pedestal is placed directly on the ground without fixing. The height of the pedestal is adjusted millimeter thanks to the red nut. The head of the slab pedestal is equipped with 4 pins which allow to obtain a regular spacing of 3 mm between each slab of the coating.
The coating used for installation on a slab pedestal must be equal to or greater than 2 cm in order to guarantee the solidity of construction. The installation of self-leveling pedestals is simple: have a pedestal each angle of the slabs, i.e. 4 pedestals for a slab. It is also possible to add a 5th to the center the tiles by removing the pins with the pliers. In order to reduce vibrations and resonances of the terrace, it is advisable to add a noise damping wedge on the head of the pedestal.

Installation steps for self-leveling paving pedestal are quick and easy to install:

  • place the pedestal on the ground according to the size of the slabs
  • adjust the size of the studs with the adjustment ring
  • place the covering slabs on the head of the pedestals.