Pedestals for paving

Adjustable pedestal 25/40 mm for paving

The paving pedestal is a support allowing the installation of tiled terraces, ceramic or grating. The paving pedestal is adjustable in height from 25 to 40 mm at millimeter near using the red ring. The head of the paving pedestal is equipped with 4 pins which serve to keep the slabs in their place. Practical, laying a terrace in tiles is made without joints: the lugs define a regular spacing of 3 mm between each slab.
EAN: 635131418228

Resistance:

The slab terrace pedestal can withstand loads of up to 1 ton. Robust, it supports without deterioration temperature variations from -40°C to + 60°C, UV rays, frost as well as acidic and chemical products. The slab pedestal for terrace is compatible with a installation near a swimming pool.

Manufacturing:

Made in France, the RINNO slab pedestal is environmentally friendly. It is made from polypropylene, a recycled and recyclable material.

Conformity:

RINNO pedestals comply with current standards: DTU 43.1 and 51.4.

Use of the 25/40 mm pedestal for slab terraces:

The installation of a terrace in slabs on pedestals is carried out on a loose and stable ground. In order to guarantee the solidity of the construction, the coating used must be at least 2 cm thick. Number of pedestals per slab: there must be 1 stud at each angle, i.e. 4 studs for a slab. If the slabs used are very large sizes, it is possible to place a fifth stud in the center of it by breaking the dewclaws on the head. The pedestals for slabs are placed on the ground without fixing and allow the installation of a raised terrace.

This terrace installation method is carried out quickly and easily, no need to pour a concrete slab or to carry out major works. Steps for laying the slab terrace on pedestals:

  • Place the pedestals according to the size of the tiles (4 pedestals / tile or 1 pedestal / angle)
  • Adjust the height of the terrace pedestals between 25 and 40 mm
  • Place the tiles on the pedestals.