Pedestals for paving

Adjustable pedestal 150/260 mm for paving

The adjustable slab pedestal is a support for making the foundations of a terrace raised. It is placed directly on a soft and stable ground without requiring fixing. The slab pedestal can be adjusted to the nearest 150 to 260 millimeter using the red screw. The head of the paving pedestal has 4 lugs which ensure that the slabs are held in place. Their place defines a regular spacing between each of them.
EAN: 635131418099

Resistance:

The slab terrace pedestal can withstand loads of up to 1 ton. Robust, it supports without deterioration temperature variations from -40°C to + 60°C, UV rays, frost as well as acidic and chemical products. The slab pedestal for terrace is compatible with a installation near a swimming pool.

Manufacturing:

Made in France, the RINNO slab pedestal is environmentally friendly. It is made from polypropylene, a recycled and recyclable material.

Conformity:

RINNO pedestals comply with current standards: DTU 43.1 and 51.4.

Use of the 150/260 mm paving pedestal:

The slab pedestal can accommodate a slab-shaped coating whether it is tiling, ceramic or gratings. Use only a coating measuring 2 cm thick at least.

To define the number of pedestals required, 4 pedestals are needed for 1 slab. Thus, the pedestals are position cladding tiles for terrace at each angle. If you use tiles of large dimensions, it is possible to place an additional stud in the center of it by cutting the dewclaws on the head.

The steps for installing a slab terrace on a pedestal are simple and quick to perform and do not require structural work:

  • arrange the pedestals on the ground in the format of your terrace tiles
  • adjust the size of the pedestals by turning the nut
  • lay the slabs on the pedestals.