Pedestals for decking

Adjustable pedestal 150/260 mm for decking

The pedestal for decking is a support allowing the creation of the foundations of a wooden or composite terrace. The wooden terrace pedestal allows the installation of a raised terrace: it is adjustable in height from 150 to 260 mm to the nearest millimeter in order to adapt perfectly to your site. The decking pedestal is composed of an L-shaped head equipped with a tab in which the joist will be fixed to the pedestal using screws.

Available packaging:

box (48 pieces) and pallet (576 pieces).

Resistance:

The decking terrace pedestal can withstand loads of up to 1 ton. Robust, it supports without deterioration of temperature variations from -40°C to + 60°C, UV rays, frost as well as acidic and chemical products. The wooden terrace pedestal is compatible with an installation near a swimming pool.

Manufacturing:

Made in France, the RINNO PLOTS pedestal for decking is environmentally friendly. It is made from polypropylene, a recycled and recyclable material.

Conformity:

RINNO PLOTS brand terrace pedestals comply with current standards: DTU 43.1 and 51.4.

Use of the joist pedestal for terrace:

The decking pedestal is made for structures for pedestrian use only. The decking pedestal allows to receive a coating in wood or composite slats.

Note: never use the Composite joist for the foundation of the terrace.

The method of installation on terrace pedestals offers many advantages because it is both economical, simple and quick to set up. Before starting your work, make sure that the soil intended to receive the terrace is loose ground. Then, you just need to perform these few installation steps:

  • Place the joist pedestals every 70 cm
  • Adjust the size of the pedestals and check the level of the installation
  • Place the joists on the head of the pedestals and screw them into the tab
  • Install the covering for wooden decks.